PS Title
   
IBH Link S5 ++



Hardware








Software








 


 

 

 

IBH Link S5++

IBH Link S5++

Cost-efficient alternative solution for conventional PLC-PC-connections via Ethernet
If a PLC has to be connected via Ethernet with a PC, usually a CP communication processor needs to be applied to the PLCs rack.
Due to the increasing integration in automation technology, more than ever a connection from a PLC to a PC is required. In general, the communication processors (e.g. CPs from Siemens, or Ethernet components from other manufacturers) are used for the connection to the PLC.
As an alternative solution, IBHsoftec has recently introduced the IBHLink S5++ for connecting a PLC with a PC. The IBHLink S5++ is a compact and robust Ethernet-converter within a 15-pin Sub-D-housing for a connection via a switch, a hub or even directly to a PC with a common network adaptor.

 

The used protocol is the standard TCP/IP protocol. In this way, the user can benefit from all the advantages of Ethernet like remote maintenance via a standard router or VPN-connections (Virtual Private Network). Likewise, a direct connection to the Internet is possible.

All required drivers for the STEP® 5 V7.16 or higher and for S5 for Windows®are included . Of course you can also use it with the IBH OPC Server.

S7-HMI devices can read and write variables from the S5 PLC using the RFC1006 protocol.

Besides the programming capabilities also an application programming interface for HMI applications is included.
For Windows operating systems there are samples in the languages Visual Basic® , Visual C®, C++®, VB.net®, C#®, Delphi®, Java®, Excel® included.

IBHNet Driver

After installation the samples can be found at:

<Your drive > :\IBH softec GmbH\IBH_Net\Samples

 

 

 
 
 
 
     
   
copyright © 2004 P.S. Union Progress Co.,Ltd. All Rights Reserved
Phone : (662) 931-1994-5, (662) 530-3764-5 Fax : (662) 931-1989 Email : sales@ps-union.com